Kenwood KRF-V7771D - Manual (Page 36)

36
KRF-V7771D (En/T)
Operations
Open the “Tuner” menu screen.
1 Select the “Tuner” icon.
2 Select the receiving band.
The band is alternated every time “Band” is selected.
FM += AM
3 Select the tuning method.
The tuning method is alternated every time “Auto” is se-
lected.
÷ Usually set this switch to “Auto”.
Select manual tuning when noise interferes due to weak radio
wave. (The stereo broadcasting is received in monaural during
manual tuning.)
4 Select a station.
Select the “ ”or “ ” icon of “Freq.”.
Auto tuning : The next station found is tuned automatically.
Manual tuning : Press repeatedly or hold until a station is tuned.
Broadcast reception
Receiving a broadcast station For listening to RDS stations,
see “Functions of RDS”.
‡
+=
Auto
(Manual tuning)
Auto
(Auto tuning)
Receiving a station by specifying the frequency
1
Open the “Tuner” menu and select band.
1 Select the “Tuner” icon.
÷ The last tuned frequency is displayed.
2 Select the receiving band.
The band is alternated every time “Band” is selected.
FM += AM
2
Specify the frequency.
1 Select the “Direct” icon.
2 Input the frequency to be tuned using the numeric icons as
follows.
Examples of input frequencies :
AM 810 kHz : 81) Entr
AM 1260 kHz : 126) Entr
FM 89.00 MHz : 89)) Entr
FM 92.50 MHz : 925) Entr
÷ If you made a mistake, the frequency display will blink for a few
seconds. In this case, try step 2 again.
Tuner
RDS Direct
Memory/
10key Pad
FM 108.00MHz
Freq.
11ch
P.Call
Auto Band
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
1
2
3
4
Tuner
RDS Direct
Memory/
10key Pad
FM 108.00MHz
Freq.
11ch
P.Call
Auto Band
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
1
2
Tuner
Direct
Memory/
10key Pad
FM 89.00MHz
Freq.
11ch
P.Call
Auto Band
Direct
FM 108.00MHz
1 2 3
4 5 6
7 8 9
0 Entr Clr
RDS
1
2