Kenwood KRF-V7771D - Manual (Page 32)

32
KRF-V7771D (En/T)
Operations
Remote control of system components
CD Text playback
1
Select the “CD1” icon.
2
Select the “Mode” icon.
3
Select “More” in the “CD Mode” menu screen.
4
Operation in the “CD Mode (More)” menu screen.
5
Select “Text” in the “CD Mode” menu screen.
6
Read the CD text display screen. (Playing the CD)
1 Select the disc.
2 Select the playback icon.
CD1 remote control
1
Select the “CD1” icon.
2
Select the icon to be controlled.
÷ The “CD1” input is selected.
CD 2/Tape 2 remote control
1
Select the “CD2/Tape2” icon.
2 Select the icon to be controlled.
÷ The “CD2/Tape2” input is selected.
Remote control of a multiple CD player
÷ The “CD1” input is selected.
÷ The “CD Mode” menu appears when the “Mode” icon
is selected.
1 Complete “All Data Read” on the CD player before execut-
ing “Title Data Read”.
2 Select the “Title Data Read” icon to read the disc title data. *1
D : Disc No.
T : Track No.
✱ : Track title read *2
1 Selecting the icon of the component to be controlled from the
segments
2 Performing operation in the menu screen of the selected
component
General operation flow
÷ Complete the operation in “Assigning the connected components
to the selected inputs” beforehand. (
÷ Although the menu screen of each component is variable depending
on the setup code, this section uses the most typical control menu
screens for ease of description.
÷ Refer to the instruction manual of each component for details.
÷ The selected input changes according to the selection.
÷ *1 : Title Data Read
When the “Title Data Read” icon is selected, the indicator on the
receiver main unit lights up. Do not displace the remote control unit
during this. The read time is variable depending on the data quantity,
but it may sometimes take as long as a few minutes.
*2 : Track Title Read
If the track title cannot be displayed properly, select the “Track Title
Read” icon.
The marketed models are variable depending on countries and
areas. Please find the operation descriptions that are applicable
to your model.
÷ Select the “ ” (checkmark) icon to return to the
screen in 3.
÷ The CD can also be played by selecting one of the titles
being displayed.
Example of menu screen :
When the system setup
code is input
CD1: CD
Track 05
012
1 2 3
4 5 6
7 8 9
0 +10
Mode
+100
Disc Set
CD2 / Tape2: CD
Track 05
012
1 2 3
4 5 6
7 8 9
0 +10
Mode
+100
Disc Set
CD1: CD
Track 05
012
1 2 3
4 5 6
7 8 9
0 +10
Mode
+100
Disc Set
CD Mode
Random
Repeat
Display
More
Text
CD Mode (More)
Subout Monitor All
Info.
All Data Read
Continuous Play
Title Data Read
CD Mode
Random
Repeat
Display
More
Text
CHERRY
D 150
T 4
5.Sunshine
3.Woody House
2.Springtime
1.Wind
4.Today
÷ The CD Mode (More) menu screen appears..
÷ The CD text display screen appears..
Example of menu screen :
When the system setup
code is input
Tuner CD1
Video2 Video3 Video4 Video1 TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2 Input
Digital Input
Analog
AV AUX
Macro Remote
Mode
Main
Menu
÷ When switching to other inputs, make sure to switch off
the “CD 2/ TAPE 2 MONITOR” indicator with “CD 2/Tape
2” icon.