Konica Minolta Q-M200 - Manual (Page 72)

Setting the date printing
Each time the Set/Zoom button is pressed, the
setting alternates between ON (initial setting) and
OFF. When ON is set, the date is recorded in
image data registered in the Automatic image print
file for use by the date printing. This setting is
effective only for the images recorded in the
automatic image print file after this setting.
● Selecting the AE system (*)
Each time the Set/Zoom button is pressed, the
setting alternates between “Regular” (multi pho-
tometry/initial setting) and “Spot” (center spot
photometry).
● Selecting slow shutter speeds (2 sec. - 1/8
sec.) (*)
Each time the Set/Zoom button is pressed, the
setting alternates between “Enable” and “Disable”
(initial setting).
● Changing the selftimer time (*)
Each time the Set/Zoom button is pressed, the
setting alternates between “10 sec” (initial setting)
and “3 sec”.