Konica Minolta Q-M200 - Manual (Page 19)

Reference:
* See Release Lock.
Note:
When looking through the viewfinder, the sound
of starting the eye start will be heard. However,
this is not malfunction. (When the eye start is
set to ON.)
5. Gently press the shutter
button farther. When the
beep sounds, taking of
the photograph has been
completed. Then, writing
of the image to the CF
card will start. The sand-
glass mark in the data
display panel will start blinking, indicating the
image photographed has been written to the CF
card and the card access LED will light amber
at the same time.
○
* Never eject the CF card while the card access
LED is lit.
Note:
The number displayed in the card status indi-
cator of the data display panel indicates the
number of shooting images to be left.
The number of images may vary depending on
the CF card remaining space and the images
selected by the QUALITY button.
* Replace the batteries with new ones when the
battery indicator in the data display panel
shows “half” (
).
6. Press the power button.
The lens barrier will close automatically.
Press the
shutter
button
farther.
Battery indicator
POWER