Konica Minolta Q-M200 - Manual (Page 43)

medium-speed (N;3 frames/sec.) and high-
speed (H;4 frames/sec.).
7. Press the select buttons ( , ) and change to
the 4-frame continuous shooting mode.
8. Press the Set/Zoom button to return to the
through image.
The through image frame will be displayed in
yellow, except in the standard mode.
To change the setting mode again, repeat steps
4 through 7.
Notes:
* The 4-frame images will be saved in 640 (W) ×
480 (H) pixels size.
During playback, these images will appear as
shown on the previous page.
* The 4-frame continuous shooting function and
digital 2 × zoom function cannot be used at the
same time.
* If the 4-frame continuous shooting mode is set
when zoom has been selected, the zoom set-
ting will be canceled.
* The 4-frame continuous shooting mode re-
mains valid until the LCD monitor is turned off.
When turning the LCD monitor on, the setting
returns to default (Standard photo mode).