Konica Minolta bizhub 163 - Manual (Page 85)

3 Network printing
3-20 IC-206
IPP printing connections
Establish the IPP printing connection. The IPP printing connection must be
set up starting from the installation of the printer driver. (For details on install-
ing the PCL driver, refer to “Installing the printer driver by using the Add Print-
er Wizard” on page 2-15. If the GDI driver is to be installed, refer to the User’s
Guide for the GDI printer controller, included with this machine.)
1
For Windows 2000: On the Start menu, point to “Settings”, and then
click “Printers” to open the Printers folder.
For Windows XP/Server 2003: On the Start menu, click “Control Pan-
el”, then “Printers and Other Hardware”, and then click “View installed
printers or fax printers” to open the Printers and Faxes folder.
For Windows Vista: On the Start menu, click “Control Panel”, then
“Hardware and Sound”, and then click “Printers” to open the Printers
folder.
2
Start up the Add Printer Wizard, and then click the [Next] button.
3
Select “A Network printer or printer attached to another computer”,
and then click the [Next] button.
4
Select “Connect to a printer on the Internet or on a home or office net-
work”.
5
Type “http:///ipp.cgi” into the URL field.
– (Example) If the IP address for this machine is 192.168.1.20:
http://192.168.1.20/ipp.cgi
6
When the [Next] button is clicked, a confirmation message appears.
7
Click the [OK] button.
8
Follow the instructions that appear in order to finish the installation of
the printer driver.