Konica Minolta bizhub 163 - Manual (Page 163)

7 Network settings
7-24 IC-206
Specifying the SMTP port number
1
In the “E-MAIL SETTING 1” menu, press the [,] or [+] key until “SMTP
PORT NO.” is selected, and then press the [OK] key.
2
Type in the port number of the SMTP server.
– A port number between 1 and 65535 can be specified. Normally,
port number 25 is used.
3
Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 1”
menu appears again.
Specifying the SMTP server connection timeout
1
In the “E-MAIL SETTING 1” menu, press the [,] or [+] key until “SMTP
TIMEOUT” is selected, and then press the [OK] key.