Konica Minolta bizhub 163 - Manual (Page 178)

Network settings 7
IC-206 7-39
Specifying the search base
1
In the “LDAP SETTING” menu, press the [+] or [,] key until “SEARCH
BASE” is selected, and then press the [OK] key.
2
Specify the database where the LDAP server is searched.
– The search base can contain a maximum of 64 characters.
– For the search base, consult with the network administrator.
– If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
3
Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu
appears again.
Specifying the attribute setting
1
In the “LDAP SETTING” menu, press the [+] or [,] key until “AT-
TRIBUTE” is selected, and then press the [OK] key.