Konica Minolta bizhub 163 - Manual (Page 198)

Registering destinations 8
IC-206 8-9
3
Press the [,] or [+] key until “SPEED DIAL” is selected, and then press
the [OK] key.
4
Type in the speed dial number to be programmed, and then press [OK]
key.
– Speed dial numbers 001 through 240 can be programmed from the
control panel.
The speed dial number to be programmed appears, and then the
screen for registering settings appears.
5
Select “MANUAL SETTING” or “LDAP SEARCH”, and then press the
[OK] key.
– If “MANUAL SETTING” was selected, continue with step 6.
– If “LDAP SEARCH” was selected, continue with step 9.