Konica Minolta bizhub 163 - Manual (Page 156)

Network settings 7
IC-206 7-17
Specifying the SLP setting
1
In the “NETWORK SETTING” menu, press the [,] or [+] key until “SLP
SETTING” is selected, and then press the [OK] key.
2
Press the [,] or [+] key until “DISABLE” or “ENABLE” is selected, and
then press the [OK] key.
– Whether “DISABLE” or “ENABLE” is selected, the message “AC-
CEPTED” appears, and then the “NETWORK SETTING” menu ap-
pears again.