Konica Minolta bizhub 163 - Manual (Page 176)

Network settings 7
IC-206 7-37
5
In the “LDAP SETTING” menu, press the [+] or [,] key until “LDAP
SERVER ADDR.” is selected, and then press the [OK] key.
6
Type in the IP address or host name for the LDAP server.
– The host name can contain a maximum of 64 characters.
– To specify a host name for the LDAP server, the DNS setting must
be specified.
– For the IP address or host name of the LDAP server, consult with
the network administrator.
– If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
7
Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu
appears again.
Specifying the LDAP port number
1
In the “LDAP SETTING” menu, press the [+] or [,] key until “LDAP
PORT NO.” is selected, and then press the [OK] key.