Konica Minolta bizhub 163 - Manual (Page 175)

7 Network settings
7-36 IC-206
2
Press the [,] or [+] key until “ADMIN. MANAGEMENT” is selected, and
then press the [OK] key.
3
Type in the administrator access code, and then press the [OK] key.
– The manufacturer’s default setting is “000000”.
– If the number was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
4
Press the [+] or [,] key until “LDAP SETTING” is selected, and then
press the [OK] key.
– If fax kit FK-506 is installed