Konica Minolta bizhub 163 - Manual (Page 199)

8 Registering destinations
8-10 IC-206
6
If “MANUAL SETTING” was selected, type in the name of the destina-
tion, and then press the [OK] key.
7
Type in the e-mail address of the recipient.
– “OTHER SETTING=,” appears only if fax kit FK-506 is installed,
the transmission size and resolution for sending Internet faxes can
be specified. These settings are applied when a transmission is
specified using the procedure for Internet fax transmissions. The
settings are not applied when a transmission is specified using the
procedure for Scan to E-mail transmissions. For details on the Scan
to E-mail operation, refer to “Performing a Scan to E-mail opera-
tion” on page 9-1.
For details on Internet faxing, refer to the User’s Guide for fax kit
FK-506.
8
Press the [OK] key.
After the message “REGISTERED” appears, the “DIAL REGISTRA-
TION” menu appears again.
9
To perform an LDAP search, select “LDAP SEARCH” in the “SPEED DI-
AL” menu, and then press the [OK] key.