Kodak ESP 5200 - Manual (Page 57)

Troubleshooting
52 www.kodak.com/go/aiosupport
Status lights
The status lights indicate the condition of the printer. There are two status lights on
the printer, one that indicates power, the other indicates Wi-Fi status.
Power status light
Wi-Fi status light
Get help with problems you cannot resolve. Contact Kodak at www.kodak.com/go/contact and have the
following information available:
– Kodak Service Number (located inside the printer when
you open the printer access door)
– Printer model number (located on the control panel)
– Computer model, operating system, and version of
Home Center Software
– Exact wording of any error message(s) and the error
code
Power light What it means
Off
• The printer is turned off.
– Press the on/off button to turn on power.
• The printer does not have power.
– Make sure that the power cord is plugged into the back
of the printer and into an electrical outlet, and that the
electrical outlet has power.
Blinking
• The printer is busy.
– Wait for the printer to finish the task.
On
• The printer is ready
Power light What it means
Off The Wi-Fi radio is either turned off, or is turned on but not
connected to a wireless network.
Blinks continuously The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.