Kodak ESP 5200 - Manual (Page 20)

www.kodak.com/go/aiosupport 15
KODAK ESP 5200 Series All-in-One Printer
5. Fan and stack the paper, then insert it into the tray.
6. Move the paper forward until it stops.
7. Move the left paper-edge guide until it touches the paper.
Loading photo paper
The paper tray capacity is 20 sheets of photo paper.
To load photo paper:
1. Remove any plain paper from the tray.
2. Fan and stack the photo paper, then insert the paper (short side first) into the
tray with the logo side facing up and the glossy side down.
IMPORTANT: If the photo paper is loaded the wrong way, the ink on your pictures will
be wet and the image quality will be affected.
3. Move the paper forward until it stops.
4. Move the left paper-edge guide until it touches the paper.
left paper-edge guide