Using default settings to print a picture, Changing the settings and printing pictures – Kodak ESP 5200 User Manual
Page 24
www.kodak.com/go/aiosupport
19
KODAK ESP 5200 Series All-in-One Printer
Using default settings to print a picture
To print a picture from a memory card using the factory default settings:
1. Load photo paper with the logo side facing up (see
), and move the left paper-edge guide until it touches the paper.
2. Insert the memory card into the memory card slot.
3. Press
or
to select the picture you want to print.
4. Press
Start to begin printing.
The printer prints one 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT:
To prevent loss of data from your memory card, do not remove it from the
printer while printing.
Changing the settings and printing pictures
You can change the print photos options for an individual picture or group of
pictures, or you can change the settings and save them as the default.
To print a picture or pictures using settings other than the default settings:
1. Load photo paper with the logo side facing up (see
), and move the left paper-edge guide until it touches the paper.
2. Insert the memory card into the memory card slot.
3. Press
or
to select the picture you want to print, then press
OK.
left paper-edge guide
memory card slot
left paper-edge guide
memory card slot