Kodak ESP 5200 - Manual (Page 34)

www.kodak.com/go/aiosupport 29
KODAK ESP 5200 Series All-in-One Printer
Copying a photograph
You can copy a photograph using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
Using the default settings to copy a photograph
The default settings are either the factory default settings (see Resetting factory
defaults, page 49 ), or defaults that you have set on the printer (see Save as Defaults
at the bottom of the table under Adjusting the settings and copying a photograph,
page 30 ).
To copy a photograph using the current default settings:
1. Lift the scanner lid, and place the photograph face down in the right-front corner
of the scanner glass.
2. Close the lid.
3. Press Home.
4. Press to select Copy Photo.
5. Press Start to begin copying.