Kenwood HM-535 - Manual (Page 48)

48 EN
Specifications
[Amplifier section]
(For U.S.A. and Canada)
Rated output power during STEREO operation (FTC)
(For U.K. and Europe)
Effective output power during STEREO operation
(1 kHz, 10% T.H.D., at 6 Ω ) ................. 50 W + 50 W
Rated output power during STEREO operation
(1 kHz, 0.7% T.H.D., at 6 Ω ) ................ 37 W + 37 W
(For other countries)
Rated output power during STEREO operation
(1 kHz, 10% T.H.D., at 6 Ω ) ................. 50 W + 50 W
Frequency response
AUX ............................ 30 Hz~100 kHz (0 dB ~ -3dB)
[Tuner section]
FM tuner section
Tuning frequency range ......... 87.5 MHz ~ 108 MHz
MW (AM) tuner section
(For U.S.A. and Canada)
Tuning frequency range .......... 530 kHz ~ 1,700 kHz
(For U.K. and Europe)
Tuning frequency range .......... 531 kHz ~ 1,602 kHz
(For Australia)
Tuning frequency range .......... 531 kHz ~ 1,602 kHz
(For other countries)
Tuning frequency range
9 kHz step ............................ 531 kHz ~ 1,602 kHz
10 kHz step .......................... 530 kHz ~ 1,610 kHz
[CD player section]
Laser ....................................... Semiconductor laser
Over sampling ......................................... 8 fs (352.8 Hz)
Laser wave length .................................... 760 - 800 nm
Laser power class ....................................
Class 3A (IEC)
D/A Conversion ....................................................... 1 Bit
Main unit
Enclosure ............................................ Bass-reflex type
Speaker configuration
Woofer ...................................... 120 mm, cone type
Tweeter ..................................... 25 mm, dome type
Impedance ................................................................ 6 Ω
Maximum input level ............................................ 50 W
Dimensions ............................... W : 150 mm (5-7/8”)
H : 255 mm (10-1/16”)
D : 213 mm (8-3/8”)
Weight (net) ............................... 2.3 kg (5.5 lb) (1 piece)
KENWOOD follows a policy of continuous ad-
vancements in development. For this reason
specifications may be changed without notice.
÷ Sufficient performance may not be exhibited
at extremely cold locations (where water
freezes).
Speakers
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model
Serial Number
43 watts per channel minimum RMS, both chan-
nels driven, at 6
Ω from 90 Hz to 15 kHz with no
more than 10 % total harmonic distortion.
[Cassette deck section]
Track ................................ 4-track, 2-channel stereo
Recording system ................................ AC bias system
(Frequency: 105 kHz)
Heads
Playback/ recording head ....................................... 1
Erasing head ............................................................. 1
Wow and flutter ................................ 0.2 % (W.R.M.S.)
Fast winding time ....................... Approx. 100 seconds
(C-60 tape)
[General]
Power consumption ............................................ 120 W
Dimensions ............................... W : 180 mm (7-1/16”)
H : 255 mm (8-7/16”)
D : 335 mm (13-3/16”)
Weight (net) ........................................... 5.3 kg (11.7 lb)
5240/43-48/EN 3/9/02, 7:25 PM 48