Kenwood HM-535 - Manual (Page 42)

Timer operation
42 EN
÷ When the timer setting is completed by pressing
the set/demo key, "COMPLETE" is displayed.
÷ When the timer setting is completed by pressing
the set/demo key, "COMPLETE" is displayed.
4
Select the broadcast station (only when
TUNER is selected above).
(1) Select the preset station No.
(2) Set it.
4
Select the broadcast station (only when
TUNER is selected above).
(1) Select the preset station No.
(2) Set it.
Put the unit in standby mode.
7
÷ When the unit enters the Standby mode, the standby/
timer indicator lights in green.
÷ If there is a power failure or the power cord is un-
plugged after the timer reservation has been activated,
the standby/timer indicator blinks in green. In this
case, the clock setting should be restarted from the
beginning.
To check or modify the reservation contents, restart the timer reservation from the beginning.
or
5240/36-42/EN 3/9/02, 7:25 PM 42