Kenwood HM-535 - Manual (Page 39)

Timer operation
39 EN
Setting the timer program
(PROG. TIMER)
In each of PROG 1 and PROG 2, the timer data including the operating period and played contents can be
program and set to be activated or deactivated.
÷ Two timer settings can be reserved independently in two programs PROG 1 and PROG 2.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG 1 and PROG 2 do
not overlap.
Make preparations for the play (recording).
Set the timer setting program number.
Continued on next page
Each press switches the display contents.
1 "PROG 1 ?"
2 "PROG 2 ?"
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
÷ When a timer setting has already been made in the
selected timer, the setting will be overwritten by the
new setting.
1
Select "TIMER ?".
2
Select "PROG 1 ?" or "PROG 2 ?".
3
Set it.
(Press the set/demo key while the "?" mark is
blinking.)
Adjust the clock before setting the timer ‡
Connect the related equipment under reference to "System connection" 6~8
1
2
Playing the auxiliary input source To listen to radio
To listen to CD
The station should be preset pri-
or.
¡
Insert a disc.
(Program playback is not possi-
ble.) Insert a tape.
To listen to tape
Make timer setting of the compo-
nent connected to the AUX input
jacks.
For recording
Make preparations for record-
ing.
§
\ \ \ \
Each press switches the display contents.
"TAPE RVS"
"AUTO PRESET ?" or "AUTO MEMORY ?"
(Only when the TUNER input is selected)
"INPUT ?"
(Only when the AUX input is selected)
"TIMER ?"
"TIME ADJUST ?"
"APS ?"
5240/36-42/EN 3/9/02, 7:25 PM 39