Kenwood HM-535 - Manual (Page 17)

17 EN
Basic use method
÷ Each press pauses and plays the CD alternately.
Start playback/ To pause playback
÷ Press and hold one of the keys during playback.
Normal playback resumes at the point where the
key is released.
To fast forward and backward
Skipping tracks
÷ The track in the direction of the key pressed is
skipped, and the selected track will be played from
the beginning.
÷ When the 4 key is pressed once during playback, the
track being played will be played from the beginning.
÷ To skip further to a track located before the current
track, press the 4 key quickly.
÷ Tracks can be skipped by pressing the 4 or ¢ key
even when the CD is in stop mode. In this case, play-
back starts automatically from the point reached by
skipping.
To skip
backward To skip
forward
Forward
search Backward
search
Press the numeric keys as shown below....
To select track No. 23 : +10 X 2, 3
To select track No. 40 : +10 X 4, 0
Playback from desired track
Select the desired track No.
To stop playback
Eject the CD
÷ The CD tray will open. (Pressing the key again
closes the CD tray.)
Playback of CD
Each press of the TIME DISPLAY key changes the
displayed contents.
1 Elapsed time of track being played
2 Remaining time of track being played
("REMAIN" lights up)
3 Elapsed time of entire disc
("TOTAL" lights up)
4 Remaining time on entire disc
("TOTAL REMAIN" lights up)
Time display on CD player
÷ Only time information 1 and 2 can be displayed dur-
ing single-track repeated playback or random playback.
÷ In the program mode, display 3 shows the elapsed
time of the entire program and display 4 shows the
remaining time of the entire program.
÷ When the displayed time is 200 minutes or more,
the display shows "– – : – –".
or
(For U.K. and Europe) (For other countries)
6
CD
STOP 7
AUTO/MONO
5
2
8
0
6
3
9
4
1
7
10
TIME DISPLAY
÷ PTY ÷
TIME DISPLAY
1 1 TUNING
4 4 P.CALL
Remote control unit only
Remote control unit only
Remote control unit only
5240/14-17/EN 3/9/02, 7:22 PM 17