Kenwood HM-535 - Manual (Page 14)

14 EN
Basic use method
The volume
decreases The volume
increases
Example:
To select the CD input
or
Basic use method
Enhancement of bass
Enhancement
of bass
Muting the sound temporarily
Listening through
headphone
The system is switched ON
or STANDBY
Tone adjustment
1. Set the key to ON.
Pressing the key when the unit is ON turns it off (Standby mode
of power).
÷ Pressing the TUNER/band, CD 6, TAPE 2 3 or AUX key also turns
power on and starts playback (reception) of the corresponding input.
(One-touch operation)
÷ When the CD or TAPE input is selected while the corresponding disc or
tape has been loaded, it immediately starts to play.
2. Selecting the desired output.
÷ Pressing the TUNER/
band, CD 6, TAPE
2 3 or AUX key se-
lects the correspond-
ing input.
CD ^
TAPE *
TUNER (Broadcasts) )
AUX (External input) [Adjusting the AUX input level fl]
When CD has been selected.
Volume display
3. Volume adjustment.
÷ The display shows a reference value.
5240/14-17/EN 3/9/02, 7:22 PM 14