KORG EasyStart microX - Manual (Page 9)

Installation
6
Installation in Mac OS X
To install the microX/X50 Editor and microX/X50 Plug-In Editor into Mac OS X, use the fol-
lowing procedure.
You must install the KORG USB-MIDI Driver (included) if you want to connect the
microX/X50 to your computer via USB and use the microX/X50 Editor or microX/X50
Plug-In Editor. (For details on installing the KORG USB-MIDI Driver, refer to the
Operation Guide.)
1 Insert the included CD-ROM into your CD-ROM drive.
2 Start up the installer by double-clicking either “microX Editor Installer.pkg” located in
the “microX Editor” folder of the CD-ROM, or “X50 Editor Installer.pkg” located in
the “X50 Editor” folder.
Select the editor that matches the product you’re using.
3 Depending on the version of your Mac’s operating system, a confirmation dialog box
may appear at this point. If so, enter your password and click [OK].
When the installer starts up, the following screen will appear. Click [Continue].
4 “Import information” will appear. Read the contents, and click [Continue].
5 The “License agreement” will appear. Carefully read the contents, and click
[Continue].
A dialog box will ask whether you accept the terms of the license agreement. If you
accept, click [Agree].