KORG EasyStart microX - Manual (Page 13)

Setup
10
Using an external mixer to control the microX/
X50’s audio signal
If you want to mix the microX/X50’s audio signals with the audio signals sent from your host
application via your audio interface, or with audio signals from another sound module, make
connections as shown below.
Using your host application to control the
microX/X50’s audio signal
If you want to apply a plug-in effect to the microX/X50’s audio signal, or to control the
microX/X50’s audio signal in your host application along with other audio tracks, connect
the microX/X50 to your audio interface and route the audio signal into your host application.
Refer to the example explanations for various popular host applications on the following
pages.
Note: For details on creating audio tracks, MIDI tracks, and plug-in instrument tracks, and on
how to perform operations and make settings in your host application, refer to the host appli-
cation’s owner’s manual.
USB
USB cable
Computer
Audio interface
R
1
2 L/MONO
Powered monitors
INPUT INPUT
microX
USB
USB cable
Computer
Audio interface
R
1
2 L/MONO
Powered monitors
INPUT INPUT
microX