KORG EasyStart microX User Manual
Page 16
Setup
13
Ableton - Live 5
1
Start up Live 5, and choose “View”->“Session View.”
2
From the plug-in device browser, drag and drop “microX/X50 Plug-In Editor” onto
the session view. This will create a MIDI track with “microX/X50 Plug-In Editor”
started up. Verify that “microX/X50 Plug-In Editor” is running in the MIDI track view.
3
Press the arm button so that the MIDI input from the external source will be sent to
“microX/X50 Plug-In Editor.”
4
To route the microX/X50’s audio signal to Live 5, create an audio track. As the input of
the audio input/output section, select the audio interface input to which you’ve
connected the microX/X50’s audio signal.
5
Set the Monitor setting to “In” so that you can hear the audio signal of the microX/
X50.