Kenwood TK-5410 - Manual (Page 57)

7
• Monitor (MON)
Press this key to turn the transceiver signaling off, to listen
to all calls that are received on the channel. Press the
Monitor key again to turn the transceiver signaling back on.
• Monitor Momentary (MON)
Press and hold this key to momentarily turn the transceiver
signaling off. Releasing this key turns the transceiver
signaling back on. While signaling is off, you can listen to
all calls that are received on the channel.
• None
No function has been programmed on the key.
• Operator Selectable Tone (OST)
Refer to “Q
uiet
t
alK
(Qt)/ d
igital
Q
uiet
t
alK
(dQt)” on
page 3.
• OST Down (OSt)
Press this key to decrease the Operator Selectable Tone
number of your selected channel.
• OST Up (OSs)
Press this key to increase the Operator Selectable Tone
number of your selected channel.
• Playback (PLY)
Refer to “vgS-1 optional voice guide & Storage
unit” on page .
• Regroup Request (RGP)
Press this key to send a request to the dispatcher to join
the talkgroup set up by the dispatcher. On K2/K3/K/K/K7
model transceivers, “Dyn. Regroup” appears on the display
when the transceiver joins the talkgroup.
• Rekey Request (RKY)
Press this key to send a Hello Command (Rekey Request).
• Scan (SCN)
Refer to “SCAN” on page 2.
• Scan Delete (DEL)
Refer to “t
emporary
c
hannel
l
ocKout
” on page 2.