Kenwood TK-5410 - Manual (Page 36)

2
S
cAn
p
rogrAmming
(k2/k3/k5/k6/k7
modelS only
)
only
>
Note: Scan programming is only available when using
Conventional operation.
■
Conventional Operation
If Scan Type has been programmed for Conventional
operation, you are able to reprogram your scan list.
1 Press the key programmed as Scan Program.
• The icon appears on the display and blinks.
2 Press the Side 2 and Side 3 keys to select the zone or
channel you will add to or remove from the scan list.
• The icon appears on the display for zones/ channels
that are added to the scan list.
• Press the A key to toggle between Zone Select and
Channel Select.
3 Press the key to add the selected zone or channel to
the scan list or the B key to remove the selected zone
or channel from the scan list.
• The icon appears on the display when a zone/ channel
is added to the scan list, and disappears when a zone/
channel is removed from the scan list.
4 Press the Side 1 key to exit scan programming.
If the Priority channel has been set as Operator Selectable
by your dealer, you are also able to reprogram the Priority
mode.
1 Press the key programmed as Scan Program.
• The icon appears on the display and blinks.
2 Press and hold the A key for 2 seconds to edit the
Priority channel.
3 Press the Side 2 and Side 3 keys to select the channel
you will set as the Priority channel.