Kenwood TK-5410 User Manual

Page 33

■

Receiving Group Calls (P25)

When you receive a group call on a Conventional channel

and the received group ID matches the ID set up on your

transceiver, you can hear the caller’s voice.

When you receive a group call on a Trunking channel, the

transceiver automatically switches to the traffic channel to

receive the call.

• Readjust the volume as necessary.
• If the vibrator function is on, the transceiver will vibrate when a

call is received.

■

Receiving Individual Calls (P25)

When you receive an individual call on a Conventional

channel, a ringing tone will sound and on K2/K3/K/K/K7

model transceivers, the display will show the caller’s ID.

To respond to the call, press and hold the

PTT switch and

speak into the transceiver as you would during a normal

transmission.

When you receive an individual call on a Trunking channel,

a ringing tone will sound and on K2/K3/K/K/K7 model

transceivers, the display will alternate between the caller’s

ID and “RECEIVING”. To receive the call, press the

PTT

switch. To deny the call, press and hold the

Side 1 key or

the keypad

# key. After receiving the call, you can respond

to the call by pressing and holding the

PTT switch and

speaking into the transceiver as you would during a normal

transmission. After the call is finished, press the

Side 1 key

or the keypad

# key to end the call.

• If the vibrator function is on, the transceiver will vibrate when a

call is received.