Kenwood TK-5410 - Manual (Page 21)

q Power switch/ Volume control
Turn clockwise to switch the transceiver ON. Rotate to
adjust the volume. Turn counterclockwise fully to switch the
transceiver OFF.
w Selector knob
Rotate this control to activate its programmable function
{page }. The default setting is Channel Select.
e Concentric switch
Rotate this switch to activate one of its programmable
functions {page }.
r Transmit/ Receive/ Battery low indicator
Lights red while transmitting, green while receiving (on
Conventional channels only), and orange when receiving
an encoded call (i.e. 2-tone, DTMF signaling, etc.). Flashes
red when the battery power is low while transmitting.
Replace or recharge the battery pack when the battery
power is low.
Note: This indicator can be disabled by your dealer.
t Lever switch
Switch the toggle position to activate its programmable
function {page }. The O position turns the function ON.
The ● position turns the function OFF.
y Auxiliary (orange) key
Press to activate its programmable function {page }.
u Safety catch
Lock this catch to avoid accidentally pressing the release
latch and removing the battery pack {page 7}.
i Release latch
Press the release latch to unlock and remove the battery
pack {page 7}.
o Side 1 key
Press to activate its programmable function {page }.