Gps r – Kenwood TK-5410 User Manual

Page 41

■

Reviewing Messages in the Stack Memory

1 Press and hold the key programmed as Selcall, Status,

Selcall + Status for second to enter Stack mode.

• The last received message is displayed with the message

number.

2 Press the Side 2 and Side 3 keys to select the desired

message.

3 Press the Side 1 key to return to normal operation.

• To delete the selected message, press the

B or # key. To

confirm the deletion, press the

B or # key again.

• To delete all messages, press and hold the

B or # key for

second. To confirm the deletion, press the

B or # key

again.

hort

eSSAgeS

To send a short message, you must connect the transceiver to

a PC. Ask your dealer for details.

• Short messages can contain a maximum of 8 characters.
• On K2/K3/K/K/K7 model transceivers, received short messages

are displayed the same as Status messages and are stored in the

same stack memory. A combined maximum of Status calls and

short messages can be stored in the stack memory.

ong

eSSAgeS

To send and receive long messages, you must connect the

transceiver to a PC. Ask your dealer for details.

• Long messages can contain a maximum of 0 characters.

gpS r

eport

To send your location data, you must first connect a GPS

microphone to the transceiver. GPS data can be transmitted

using of methods: auto transmission, upon request, manual

transmission, upon pressing/releasing the

PTT switch, and

during emergency mode. Ask your dealer for details.