beautypg.com

Kenwood TK-5410 User Manual

Page 17

background image

7

i

nStAlling

/ r

emoving

the

(o

ptionAl

) B

Attery

p

Ack

1 Match the guides of the

battery pack with the

corresponding grooves on the

upper rear of the transceiver,

then firmly press the battery

pack to lock it in place.

Note:

To lift the battery pack safety catch, use a piece of hardened

plastic or metal, such as a screwdriver, that is no more than

mm wide and mm thick. It is imperative that you place the

implement under only the lip of the safety catch so that you do

not damage the release latch.

Before charging a battery pack that is attached to the

transceiver, ensure that the safety catch is firmly closed.

2 Lock the safety catch to

prevent accidentally pressing

the release latch and

removing the battery pack.

3 To remove the battery pack,

lift the safety catch, press the

release latch, then pull the

battery pack away from the

transceiver.