Kenwood TK-5410 - Manual (Page 55)

• Channel Recall (RCL)
Press this key during Scan to return to the last called zone
and channel.
• Channel Select
Turn the selector clockwise to increase the channel number
and counterclockwise to decrease it {page }.
• Channel Up (CHs)
Press this key to increase the channel number {page }.
• Clock (CLK)
Refer to “CLOCK” on page 3.
• Direct Channel 1 ~ 5 (DC1 ~ DC5)
Press of these keys to jump to a frequently used zone
and channel (pre-programmed by your dealer). If activated
by your dealer, you can set your own Direct Channels by
selecting your desired zone and channel, then pressing and
holding the Direct Channel 1 ~ 5 key for 3 seconds.
• Display Character (CHR)
Press this key to switch the display between the zone and
channel number and the channel name.
• Emergency
Refer to “EMERGENCY CALLS” on page 3.
• External Speaker (ESP)
Press this key to switch the speaker from the transceiver’s
built-in speaker to an optional external speaker.
• Function (FNC)
Press this key, then press a programmable key to activate
its secondary function.
• GPS Position Display (GPP)
Press this key when the GPS unit has been installed to
display your location data.