Kenwood TK-5410 - Manual (Page 56)

• Home Channel (HOM)
Press this key to jump to your home zone and channel
(pre-programmed by your dealer). If activated by your
dealer, you can set your own Home Channel by selecting
your desired zone and channel, then pressing and holding
the Home Channel key for 3 seconds.
• Individual (IDV)
Refer to “Making Individual Calls” on page 22.
• Keyset (KST)
Press this key to change the Keyset stored in a Secure
Cryptographic Module (SCM).
• Key Delete (KDL)
Refer to “d
eleting the
e
ncryption
K
ey
” on page 38.
• Key Lock (LCK)
Press and hold this key for second to lock the transceiver
keys. Press and hold the Key Lock key again to unlock
the keys. The PTT switch, Selector, Concentric switch,
and Toggle switch still function normally, and the following
functions can still be operated: Battery Status, Emergency,
Light, Monitor, Monitor Momentary, Squelch Off, Squelch Off
Momentary, Function, and Speaker Attenuation.
• Light (LIT)
Press this key to turn the display and keypad backlight
on. The backlight remains on for seconds before
automatically turning off. While the backlight is on,
pressing any key other than the PTT switch, the Volume
control, or the Light key will reset the second timer. To
manually turn the backlight off, press the Light key again.
If Auto backlight is activated by your dealer, the backlight
will activate by pressing any key other than the PTT switch
or the Volume control.
• Low Transmit Power (LOW)
When using a channel programmed with high power, press
this key to change the output power to low. Press the Low
Transmit Power key again to return to high power.