Simple recording, English, Settings – Samsung SHR-1041 User Manual
Page 41
English
_1
●
settings
simpLe recording
If you set
displayed "simpLe recording".
Select
buttons ($%/ ENTER) to set a desired item.
record QuaLity : Set the recording quality.
Select one from LOW/STANDARD/HIGH/HIGHEST.
The recordable time may differ, depending on the
recording quality.
record size : Set the recording resolution.
Fps : Set the frame rate per second.
time Bar : You can select a recording type for the time
line of each channel. Use the mouse to drag and drop a
time line or use the left/right buttons
(_+) on the front panel or the remote control to select a
time line and press [enter].
Select an item to record and click
- continuous : Performs the recording continuously.
- motion : The recording will perform only if a motion is
detected.
To record a motion, set both <
Sensitivity> and in
"
CAMERA>MOTION SENSOR". (Page 41)
- aLarm : The recording will perform only if an alarm
occurs.
To record an alarm event, set <
ALARM> to
The icon of applicable recording mode is displayed on the Live screen. (Page 18)
If you select no record type, the timeline record does not perform.
The record size affects the FPS.
record size
possiBLe Fps
352 Ч 240
1, 2, 3, 7, 15, 30
704 Ч 240
1, 2, 3, 7, 15
704 Ч 480
1, 2, 3, 7
When your settings are completed, click
Your settings will be applied.
.
•
•
•
•
M
.
CAM1
CAM1
CAM1
CAM1
RECORD SETUP
RECORDING
OPERATIONS
SIMPLE
RECORDING
APPLY
UNDO
RECORD QUALITY
RECORD SIZE
FPS
0
6
12
18
24
HIGH
15
704X240
MANUAL
RECORDING
CH1
CH2
CH3
CH4
CONTINUOUS MOTION
ALARM
CAM1
CAM1
CAM1
CAM1
RECORD SETUP
RECORDING
OPERATIONS
SIMPLE
RECORDING
APPLY
UNDO
RECORD QUALITY
RECORD SIZE
FPS
0
6
12
18
24
HIGH
15
704X240
MANUAL
RECORDING
CH1
CH2
CH3
CH4
NONE
CONTINUOUS MOTION
ALARM
CAM1
CAM1
CAM1
CAM1
CONTINUOUS
MOTION
ALARM
OK
CANCEL
02235A_SHR-1041K_ENG.indb 41
2009-02-17 오전 10:51:10