Samsung SHR-1041 - Manual (Page 27)

English _
●
settings
coLor setup
In the window, use the direction
buttons ($%_+/ENTER) to select .
Select and use the direction buttons
($%_+/ENTER) to select a desired item.
If you select an item of which you want to change the
setting, you will see coLor setup screen.
You can adjust all settings from 0 to 100 for each channel in fi ne
tune mode, and the default is 50.
channeL : Select a channel of which you want to set
the color.
Brightness : Adjusts the brightness of the monitor.
contrast : Adjusts the contrast of the monitor.
tint : Adjusts the luminance of the monitor.
coLor : Adjusts the display color of the monitor.
When your settings are completed, click on the
bottom.
Your settings will be applied.
motion sensor
This menu is enabled only if you have set the motion recording
in “record setup”.
In the window, use the left/right
buttons (_+) to select .
Select and use the direction buttons
($%_+/ ENTER) to set a desired item.
sensitivity : Set the sensitivity of motion detection.
You can adjust the sensitivity level from 1 to 10.
area : Select an area of motion to detect.
.
.
.

•
•
•
•
•
.
.
.
•
•
CAM1 CAM1
CAM1 CAM1
CAMERA
CAMERA
TITLE
COLOR
SETUP
BRIGHTNESS
APPLY UNDO
MOTION
SENSOR
1
2
3
4 50
50
50
50 50
50
50
50 50
50
50
50 50
50
50
50
CONTRAST TINT COLOR
CAM1
CHANNEL
1
BRIGHTNESS
50
CONTRAST
50
TINT
50
COLOR
50
CAM1 CAM1
CAM1 CAM1
CAMERA
CAMERA
TITLE
COLOR
SETUP
SENSITIVITY
APPLY UNDO
MOTION
SENSOR
1
2
3
4 5
5
5
5 AREA
AREA
AREA
AREA
02235A_SHR-1041K_ENG.indb 27 2009-02-17 오전 10:50:49