Settings – Samsung SHR-1041 User Manual
Page 32
_
settings
settings
Line type
connection mode
ddns setting
router
port Forwarding
Public IP
Static IP
Not defined
X
X
Dynamic IP
Defined
X
X
Dynamic IP
Defined
O
O
Private IP
Static IP (Internal)
Defined
X
O
When your settings are completed, click
Your settings will be applied.
ddns setting
if the dvr is connected directly to the internet
modem
If the DVR is connected via the router
1
Move to "system" "networK".
2
Set DHCP and DDNS Enabled.
Set DHCP Disabled and DDNS Enabled.
3
Restart the system.
When the system restarts, move to "system"
"networK".
4
Move to "system management"
"system inFormation".
5
Check the DDNS Domain Name.
Check the IP address.
If you are not sure about the IP, contact your
network administrator.
(Example of the private IP: 192.168.10.113)
6
Check the DDNS Domain Name.
7
Restart the system.
8
You should connect to the router and configure
the router settings of Port Forwarding or DMZ
Server.
(DVR connection port port 6100 & 80)
9
You should set the static IP of the DVR in
accordance with port 6100 & 80 of the router.
10
If you are using a remote access program, you can enter the set's Domain Name including the last 6
bytes of the MAC Address instead of the IP address.
- If the MAC address is "00-11-5F-00-00-01", the domain name will be "http://f000001.websamsung.net".
- The domain name of the appropriate set is included in the system information.
•
.
02235A_SHR-1041K_ENG.indb 32
2009-02-17 오전 10:50:53