Samsung SHR-1041 - Manual (Page 11)

English _11
●
insta
LL
ation
standard camera
A surveillance camera is provided in addition to the main unit.
Check the installation steps and the features of each camera.
camera part names
Lens : Focal length of 3.8mm enables you to cover relatively longer range of monitoring.
microphone : Transfers the onsite sound to the monitor.
camera fitting groove : Groove that is used to fit the camera bracket.
There exist two grooves; one on the top and one on the bottom.
6-pin modular jack : Connects the camera to the monitor. See "pin setting" for the connection.
sensor jack : Connects the sensor to the camera.
speaker : Transfers out the audio signal incoming from the monitor.
pin setting
installing the camera
The camera can be installed on the wall, ceiling, shelf or a desired position using the provided bracket.
Select a position where you want to install the camera.
Make sure the selected position can sustain the weight of the camera.
Use the screw bolts (M4 X L15) to mount the camera bracket onto
the wall or ceiling.
Place the camera on the selected position and fit the hole either on
the top or the bottom of the camera into the fixing bolt of the bracket,
and turn the camera clockwise.
1.

.
.
speaker (-)
video_out
gnd
speaker (+)
audio_out / alarm_out
18v dc
M4 x L15 sized screws
wall or ceiling
02235A_SHR-1041K_ENG.indb 11 2009-02-17 오전 10:50:28