Samsung HMX-R10SP - Manual (Page 39)

9
• If you cannot use a memory card that
has been used with another device,
format it with your camcorder. Note
that formatting erases all information
on the memory card.
• A memory card has a certain life span.
If you cannot record new data, you
have to purchase a new memory card.
• A memory card is a precision
electronic media. Do not bend it, drop
it, or cause a strong impact.
• Do not bend, drop, or cause strong
impact to the card.
• Do not place foreign substances on
the memory card terminals. Use a
soft dry cloth to clean the terminals if
required.
• Do not paste anything other than label
provided with the card on label pasting
section.
• Be careful to keep the memory card
out of the reach of children, who might
swallow it.
Notes on use
• Samsung is not responsible for data
loss due to misuse.
• We recommend using a memory card
case to avoid losing data from moving
and static electricity.
• After a period of use, the memory card
may get warm. This is normal and is
not a malfunction.
The camcorder supports SD and
SDHC memory cards for data
storage preference!
The data storage speed may differ,
according to the manufacturer and
production system.
• SLC (single level cell) system: faster write
speed enabled.
• MLC (multi level cell) system: only lower
write speed is supported.
For best results, we recommend
using a memory card that supports
faster write speed.
Using a lower write speed memory
card for recording video may cause
difficulties when storing.
You may even lose your video data
during the recording.
In an attempt to preserve any bit of
the recorded video, the camcorder
forcibly stores the movie on the
memory card and displays a
warning:
“Low speed card. Please record
a lower resolution.”
If you are unavoidably using a low
speed memory card, resolution
and quality of the recording may be
lower than the set value.
pages 62~63
The higher the resolution and
quality, the more memory will be
used.