Samsung HMX-R10SP - Manual (Page 145)

145
Playback on other devices (TV, etc)
Symptom Explanation/Solution
You cannot view the image
or hear the sound from the
connected device.
• Connect the audio of the Component/AV cable
to your camcorder or connected device (TV, HD
recorder, etc).
(Red colour- right, White colour- left)
• The connection cable (Component/AV cable)
is not connected properly. Make sure that the
connection cable is connected to the proper jack.
pages 119~123
• When you are using the Component/AV cable,
make sure the red and white plugs of your
Component/AV cable are connected.
pages 119~123
• This camcorder does not support the audio
output signal when the camcorder is connected
with TV in the video or photo record mode. The
audio output signal is supported as long as the
camcorder is connected in the video playback
mode. This is not an error.
The image appears distorted on
a TV.
• This happens when TV type of the camcorder is
different from the TV. Set the TV type to match
the aspect ratio of your TV. page 104
You cannot view the image
or hear the sound from a TV
connected using the HDMI cable.
• Images will not be output from the HDMI jack if
the material is copyright protected.
Connecting/Dubbing with other devices (Recorder, PC, Printer, etc)
Symptom Explanation/Solution
You cannot dub correctly using
the HDMI cable.
• You cannot dub images using the HDMI cable.
You cannot dub correctly using
the Component/AV cable.
• The Component/AV cable is not connected
properly. Make sure that the Component/AV cable
is connected to the proper jack, i.e. to the input
jack of the device used for dubbing images from
your camcorder. page 124
Printouts cannot be made using
a PictBridge printer.
• Your printer may not print images edited on a computer
or recorded using other device. This is not an error.
TROUBLESHOOTING