Samsung HMX-R10SP - Manual (Page 127)

Off
On
1 / 1
PC Software
1
• Use the provided USB cable. (Supplied by Samsung)
• Don’t apply excessive force when inserting or extracting the USB cable into/from a USB jack.
• Insert a USB after checking the direction of its insertion is correct.
• We recommend using the AC power adaptor as the power supply instead of the battery pack.
• When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction
• If you disconnect the USB cable from the PC or the camcorder while transferring, the data
transmission will stop and the data may be damaged.
• If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable
along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the camcorder.
• According to your computer type, the Intelli-studio programme may not automatically run. In this
case, open the desired CD-ROM drive that has the Intelli-studio programme in My Computer and run
iStudio.exe.
• When an USB cable is connected, according to the application programme (e.g. EmoDio) installed
on your computer, the corresponding programme may start first of all.
USING THE Intelli-studio PROGRAMME
Using the Intelli-studio programme built-in your camcorder, you can transfer video/
photo files onto your PC and edit them on your computer. The Intelli-studio offers the
most convenient way for you to manage the video/photo files by using the simple USB
cable connection between the camcorder and your PC.
Step 1. Connecting the USB cable
1. Set the “USB Connect: Mass Storage” and “PC Software: On.”
• You will find the default menu settings are set as the above.
2. Connect the camcorder and the PC with the USB cable.
• A new file saving screen appears with the Intelli-studio main
window.
• According to your computer type, the corresponding
removable disk window appears.
3. Click “Yes,” the uploading procedure will start. Click “Yes” to
confirm.
• If you do not want to save a new file, select “No.”
To disconnect the USB cable
After completing the data transfer, make sure to disconnect the
cable in the following way:
1. Click the “Safely Remove Hardware icon” icon on the taskbar.
2. Select “USB Mass Storage Device,” and then click “Stop.”
3. If the “Stop a Hardware device” window appears, click “OK.”
4. Disconnect the USB cable from the camcorder and PC.
Starting Intelli-studio programme