Samsung HMX-R10SP - Manual (Page 105)

105
1. Touch the Menu ( )  Setting ( ) tab  “Analogue TV Out.”
2. Touch a desired submenu item.
• Check the TV type, connection jack, and the resolution of
the recorded video before you choose the desired submenu
item.
3. To exit the menu, touch the Exit ( ) or Return ( ) tab.
Analogue TV Out
You can set the component or composite video output to match the TV you have connected.
PRECHECK!
• Using the Component/AV Cable provided with your camcorder, connect the camcorder to your TV. page 119~123
• This HD camcorder provides the two-in-one component/AV cable that fits the purpose of the component and the AV
cable. Therefore, when using the component/AV cable, you must check the right method for the TV output by setting
the “Analogue TV Out” menu.
• The Analogue TV Out indicator is displayed only when the camcorder is connected to a TV.
• For details on TV specification, refer to the user manual of the connected TV.
• Although the “Analogue TV Out” is set to “Component 576p,” the component video signal
is output as interlaced format if the resolution is set to [HD]1080/50i.
Submenu items
• Component Auto( ): The video signals are output in the same format as the recorded file. Use this setting only when
connecting to an HDTV.
• Component 576p( ): The recorded file is output in the 720x576P format. Use this setting only when connecting to a regular
TV which supports the progressive scan at the SD(Standard Definition) level by using the component(Y/Pb/Pr, AUDIO) jacks.
• Component 576i( ): The recorded file is output in the 720x576i format. Use this setting only when connecting to a regular
TV which only supports the SD(Standard Definition) resolution without the progressive scan by using the component(Y/Pb/Pr,
AUDIO) jacks.
• Composite( ): The composite video signals are output via the Component/AV cable (green). Use this setting only when
connecting to a regular TV that has no component video jacks.
5 / 7
PC Software
USB Connect
TV Type
Analogue TV Out
90
MIN
1. Touch the Menu ( )  Setting ( ) tab  “Default Set.”
• A message appears asking for your confirmation.
2. Touch "Yes" if you want all the settings return to the
default.
• The Time Zone screen appears after all settings return
to the default.
3. Set the date and time again. page 35
Default Set
You can restore all menu settings to the default conditions.
• Do not turn off the power while using this function.
• Initializing the HD camcorder settings to factory defaults
does not affect recorded images.
6 / 7
TV Connect Guide
TV Display
REC Lamp
Default Set
90
MIN
6 / 7
TV Connect Guide
TV Display
REC Lamp
Default Set
90
MIN
Default Set?
All settings return to default.
YES NO