Samsung HMX-R10SP - Manual (Page 32)

SWITCHING TO THE POWER SAVING MODE
• The power saving mode does not work in the following situations:
- When the camcorder has a cable connection. (USB, Component/AV, or HDMI)
- While recording, playback, or the slideshow is being operated.
- When the LCD screen is opened.
• The camcorder consumes the less battery power in the power saving mode (about
50% of the power consumption in the standby mode) However, if you plan to use the
camcorder for the maximum length of time period, it is recommended to turn off the
camcorder by pressing the power( ) button when not using it.
basic operation of the camcorder
If you need to use camcorder for the extended time, the following functions enable you to
prevent unnecessary energy consumption.
In STBY mode:
• The camcorder switches to "Quick On STBY" mode when the LCD screen is closed.
page 98
In Playback mode (Includes the thumbnail view mode):
• The camcorder switches to the sleep mode when the LCD screen is closed, and
then if idle for more than 20 minutes the camcorder turns off.
However, if “Auto Power Off: 5 Min” is set, the camcorder turns off in 5 minutes.
• If you open the LCD screen or connect a cable to the camcorder during sleep
mode, the sleep mode ends and returns back to the last used operation mode.
LCD screen is closed After 20 minutes LCD screen is open
DC I N DC I N
DC IN DC IN
Memory full!
00:00:04 / 00:00:49
100-0001 160 MIN
DC I
N
DC I
N