Demo, Anynet+ (hdmi-cec), Advanced operation: system setting – Samsung HMX-R10SP User Manual
Page 106
106
1.
Touch the Menu (
)
Setting ( ) tab
“Demo”
“On.”
• If you don't want this function, touch “Off.”
2.
To exit the menu, touch the Exit ( ) or Return (
) tab.
• The Demo function starts on the LCD screen.
Demo
Demo mode automatically shows you the major functions that are included with your camcorder so
that you may use them more easily.
Submenu items
• Off :
Disable the function.
• On: Enable
s the Demo function.
1.
Touch the Menu (
)
Setting ( ) tab “
Anynet+ (HDMI-CEC).”
2.
Touch a desired submenu item.
3.
To exit the menu,
touch the Exit ( ) or Return (
) tab.
• When the camcorder is connected to the Anynet+ supported TV,
you can operate some functions of the camcorder using the TV’s
remote control.
Anynet+ (HDMI-CEC)
This camcorder supports Anynet+. Anynet+ is an AV network system that enables you to control all
connected Samsung AV devices with an Anynet+ supported Samsung TV remote control.
Submenu items
• Off: Disable the fun
ction.
• On: The Anynet+ functio
n is enabled.
• When you turn on the camcorder that is connected to an
Anynet+ supporting TV with an HDMI cable, the TV (Anynet+
supported) is automatically turned on. If you do not want to use
this Anynet+ function, set the “Anynet+ (HDMI-CEC)” to “Off.”
• For details on the Anynet+ (HDMI-CEC) function, refer to the
user manual of Samsung’s Anynet+ supported TV.
• The Demo function does not operate in the following cases:
- If “Auto Power Off” is set to “5 Min”(uses the battery as main
power), the Auto Power Off function will operate prior to Demo.
advanced operation: system setting
Using the Demo function
• The Demo mode is cancelled in the following cases:
- If the LCD screen is touched.
- If any button is operated (Recording start/stop, Q.MENU, Display
(
)/iCHECK, EASY Q, MODE, PHOTO, etc.) However, the
camcorder will enter the Demo mode automatically after 5 minutes
in STBY mode if it is idle for 5 minutes without an operation. If you
don’t want the Demo function starts, set “Demo” to “Off”.
Off
On
1 / 1
Demo
/
Language
Demo
Anynet+ (HDMI-CEC)
90
MIN
/
Language
Demo
Anynet+ (HDMI-CEC)
90
MIN
1080i FULL HD Video
9.0 Megapixel Photo
HMX-R10
Off
On
1 / 1
Anynet+ (HDMI-CEC)