Symbol Technologies DS6707 - Manual (Page 69)

Imaging Preferences 5 - 9
Snapshot Aiming Pattern
Parameter # F0h, 2Ch
Select Enable Snapshot Aiming Pattern to project the aiming pattern when in Snapshot Mode, or Disable
Snapshot Aiming Pattern to turn the aiming pattern off.
Image Cropping
Parameter # F0h, 2Dh
This parameter crops a captured image. Select Disable Image Cropping to present the full 1280 x 1024
pixels. Select Enable Image Cropping to crop the image to the pixel addresses set in
Crop to Pixel Addresses
on page 5-10 .
*
Enable Snapshot Aiming Pattern
(01h)
Disable Snapshot Aiming Pattern
(00h)
NOTE
The digital imager scanner has a cropping resolution of 4 pixels. When a cropping area is
less than 3 pixels, the entire image transfers.
Enable Image Cropping
(01h)
*
Disable Image Cropping
(Use Full 1280 x 1024 Pixels)
(00h)