Decode aiming pattern, Decode aiming pattern -12, Decode aiming pattern parameter # f0h, 32h – Symbol Technologies DS6707 User Manual
Page 54
4 - 12 DS6707 Digital Imager Scanner Product Reference Guide
Decode Aiming Pattern
Parameter # F0h, 32h
This parameter only applies when in Decode Mode. Select Enable Decode Aiming Pattern to project the
aiming pattern during bar code capture, or Disable Decode Aiming Pattern to turn the aiming pattern off.
NOTE
With picklist enabled, the decode aiming pattern flashes even when the Decode Aiming
Pattern is disabled.
*
Enable Decode Aiming Pattern
(02h)
Disable Decode Aiming Pattern
(00h)