Symbol Technologies DS6707 - Manual (Page 30)

2 - 4 DS6707 Digital Imager Scanner Product Reference Guide
LED Definitions
In addition to beep sequences, the digital imager scanner uses a two-color LED to indicate status. Table 2-2
defines LED colors that display during scanning.
Scanning in Hand-Held Mode
Install and program the digital imager scanner (see Setting Up the Digital Imager Scanner on page 1-3 ). For
assistance, contact the local supplier or the local Symbol Global Interaction Center .
Scanning with the Digital Imager Scanner
1. Ensure all connections are secure (see the appropriate host chapter.)
2. Aim the digital imager scanner at the bar code.
Figure 2-8 Scanning in Hand-Held Mode
3. When the digital imager scanner senses movement, in its default Auto Aim trigger mode, it projects a red
laser aiming pattern (shown in
Figure 2-9 ) which allows positioning the bar code or object within the field of
view. (To turn off the default Auto Aim trigger mode, see Trigger Mode on page 4-8 .)
Figure 2-9 Laser Aiming Pattern
If necessary, the digital imager scanner turns on its red LEDs to illuminate the target bar code.
Table 2-2 Standard LED Definitions
LED Indication
Off No power is applied to the digital imager scanner, or the digital imager scanner is on
and ready to scan.
Green A bar code was successfully decoded.
Red A data transmission error or digital imager scanner malfunction occurred.