Symbol Technologies DS6707 - Manual (Page 227)

Advanced Data Formatting 11 - 19
Specific String, Any Location
Scan the bar code below, then, using the Numeric Keypad beginning on page 11-20 , scan a two-digit number
representing the position (use a leading “zero” if necessary). Then scan the desired character or characters
(up to a total of 8) on the
Alphanumeric Keyboard beginning on page 11-86 , followed by the End of Message
bar code on page 11-95 .
After scanning the following bar code:
1. Enter a location using the Numeric Keypad beginning on page 11-20 .
2. Enter a string using the Alphanumeric Keyboard beginning on page 11-86 .
3. Scan End of Message bar code on page 11-95 .
Specific String Any Location
Any Message OK
By not scanning any bar code, all selected code types are formatted, regardless of information contained.