Symbol Technologies DS6707 - Manual (Page 136)

8 - 16 DS6707 Digital Imager Scanner Product Reference Guide
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or
High RTS line state.
Beep on
When this parameter is enabled, the digital imager scanner issues a beep when a character is detected
on the RS-232 serial line. is issued to gain a user's attention to an illegal entry or other important event.
*
Host: Low RTS
Host: High RTS
Beep On Character
(Enable)
*
Do Not Beep On Character
(Disable)