Symbol Technologies DS6707 - Manual (Page 313)

Appendix A: Standard Default Parameters A - 5
EAN-13/JAN 13 03h Enable 10-8
Bookland EAN 53h Disable 10-8
Decode UPC/EAN/JAN Supplementals (2
and 5 digits) 10h Ignore 10-9
UPC/EAN/JAN Supplemental Redundancy 50h 10 10-10
Transmit UPC-A Check Digit 28h Enable 10-11
Transmit UPC-E Check Digit 29h Enable 10-11
Transmit UPC-E1 Check Digit 2Ah Enable 10-12
UPC-A Preamble 22h System Character 10-12
UPC-E Preamble 23h System Character 10-13
UPC-E1 Preamble 24h System Character 10-14
Convert UPC-E to A 25h Disable 10-14
Convert UPC-E1 to A 26h Disable 10-15
EAN-8/JAN-8 Extend 27h Disable 10-15
UCC Coupon Extended Code 55h Disable 10-16
Code 128
Code 128 08h Enable 10-17
UCC/EAN-128 0Eh Enable 10-17
ISBT 128 54h Enable 10-18
Code 39
Code 39 00h Enable 10-19
Trioptic Code 39 0Dh Disable 10-19
Convert Code 39 to Code 32 (Italian
Pharmacy Code) 56h Disable 10-20
Code 32 Prefix E7h Disable 10-20
Set Length(s) for Code 39 12h 13h 2 to 55 10-21
Code 39 Check Digit Verification 30h Disable 10-22
Transmit Code 39 Check Digit 2Bh Disable 10-23
Code 39 Full ASCII Conversion 11h Disable 10-23
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.