SVAT Electronics CLEARVU3 - Manual (Page 52)

SVAT ELECTRONICS now you can see
CLEARVU3 47
13.2. Troubleshooting
Before calling technical support, try the following troubleshooting tips:
Problem Solution
No picture displayed on LCD screen
- Check all connections to make sure camera/
DVR is powered on and connected to the AV1 or
AV2 input of the monitor.
- Make sure the monitor is powered on
No sound
- Ensure that the camera/DVR connected supports
sound and that sound is enabled on the camera/DVR
- Check all connections to ensure that the RCA
Audio cable is connected to the monitor
- Make sure that the volume is not turned down or
muted on the monitor or DVR/camera.
Upside-down or inverted picture
- Press the horizontal/vertical flip buttons to fix the
picture.
Distorted Color/Too Bright or Dark
- Check the picture options to make sure that color,
brightness, and contrast are set properly.
14. CAMERA GUIDE
14.1 Features Of The CV67 (Camera)
1. Sun Shield - Helps prevent glare
from bright lights.
2. Infrared (IR) - LEDs Allows the
camera to see in the dark up to
15ft away.
3. CDS Sensor- Turns on the infrared
LEDs when it gets dark out.
4. Camera Housing - Made of
anodized aluminum to prevent rust.
5. Camera Mount - Allows the
camera to be desk or wall
mountable.
6. Connection to Video / Power
Wire Converts to RCA.